【EIBOS Official】3D Printer Filament Dryer Cyclopes with Fan, Filament Dry Box 2 Rolls with Adjustable Temp Max 70℃, Humidity Sensor, Infinite Timer, Compatible with 1.75mm 2.85mm 3.00mm PLA Nylon TPU

Brand: EIBOS

Color: Black

Features:

• 【FILAMENT DRYER & STORAGE BOX】the filament dryer Cyclopes is specifically made for the purpose of drying 3D printer filament, aimed at removing the moisture that filament absorb from ambient exposing. Drying while printing, the dryer function as both storage box and filament holder (Note: you need MANUALLY ROTATE the rolls for drying when NOT ACTIVELY printing to avoid the direct hot-air from the bottom). US Plug, input voltage 110V-120V
• 【REAL-TIME HUMIDITY MONITOR & ADJUSTABLE TEMPERATURE】 a dramatic drop in the humidity level clearly indicated by the real-time humidity monitor, (NOTE: the dryer came with a A76/LR44 button battery, just switch the ON/OFF button on the back of hygrometer before using), measurement range from 10%-99%. Heating temperature can be adjusted to meet needs of various filaments, the setting temp will be displayed by the LCD panel. The default time is 6hrs, you can also reset from 0-24hrs up to 70℃ or even infinite heating time regarding your needs
• 【MULTIPLE EXIT HOLES & COMPATIBLE WITH MULTIPLE SPOOLS】Cyclopes works for a wide range of filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, ABS, Silk, Carbon fiber, Wood, etc. Teflon tube included, 10 exits holes are available for you to choose from. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of large filament at the same time, it has two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture (Note: for Single Large Spool-217x174mm, Dual Small Spools: 217x80mm(H*W)
• 【BUILT-IN FAN & 100W PTC HEATER】 a built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture, different from applying normal heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly
• 【RESTORE YOUR BRITTLE FILAMENT】keep your old left out brittle filament before having our filament dryer, Cyclopes will help drying and restoring the spools, even make them better than the brand new unit, impeccable prints are the result. No adhesion, cloggings, bubbles, or any plastic strings. Easy to use, no need extra set up
• 【LOW NOISE & CUSTOMER SERVICE】eibos cyclopes has upgraded its PCB board with the newest relay for better performance, aimed at minimizing any noise while the dryer operating, NO clicks on and off sound at all, the batch from Nov 2023 applies. ❤️‍🔥The dryer is designed to reduce humidity levels to 10%, if the humidity indicator does not display accurately, please contact us for Humidity Sensor Support❤️‍🔥Besides, 1-Year After-Sales Guarantee offered for your peace of mind

Details: EXTRA LARGE HOMOTHERMIC BOX
·Can use 4 rolls of 0.5kg filaments/2 rolls of 1kg filaments/1 roll of bigger than 2kg filament at the same time
·Suitable for multiformat filaments which including 1.75mm/2.85mm/3mm
·Hot air heating makes drying more efficient; the unique air duct design makes CYCLOPES conform to the principle of air thermodynamics, and the filament is heated more evenly.
·Real-time monitoring of the temperature in the box, keeping the temperature in the box constant by using the closed-loop intermittent heating mode
ADJUSTABLE HEATIING TIME
·The heating time can be set based on your requirement，the countdown setup is from 0h to 24 hours and the shutdown is accurate to minute. You can set unlimited heating as well. In this setting，CYCLOPES is in the normally open state.The parameters set last time can be automatically memorized，and will not be affected by power failure.
FIRE RETARDANT MATERIAL
·The core components of CYCLOPES are made of VO flame retardant materials. Built-in temperature protection switch is also included，automatic tripping over temperature. This will make CYCLOPES even safer.
DRYING WHILE PRINTING
·CYCLOPES is able to achieve drying while printing. A total of 10 holes are set on the shell to make multi-directional outlets possible which in order to satisfy the use of various types of printer or multiple printers use at the same time.
TRANSPARENT LID
·The transparent lid makes it easy for you to observe the heating process without opening the cover,save humidity and temperature inside the filament dryer box

Part Number: ‎Easdry

model number: CYCLOPES