HQHAOTWU Portable Electric Hinge Boring Insertion Machine Adjustable Punching Depth Hinge Drill Press Machine Woodworking Hinge Boring Processing Machine 45-9.5 Combined Drill

Brand: HQHAOTWU

Features:

• 【Single Head Hinge Drilling Machine】This portable woodworking hinge drilling machine features small body and convenient operation, and can adjust the drilling position vertically and horizontally, which is convenient and fast, and the switch control is accurate and in place.
• 【Accurate Drilling】Adjust the position of the positioning baffle at will according to the scale as needed. The scale control is accurate to reduce the error rate.
• 【Parameters】Power:1100W; Punching Depth:0-40mm; Speed:2840r/min; Drill:φ35mm*1,φ8mm*2; Combined Drill Model: 45-9.5;Scale:19.6″(50cm).
• 【Excellent Design】One-time completion of hinge hole and screw holes on both sides of the hole, greatly improve the work efficiency. Featured with high quality combination drill, which can be changed at any time,suitable for drilling various profiles.
• 【Application】This machine is used for drilling processing of cabinets, wardrobes, door processing and manufacturing,it ​is mainly for loose leaf and hinge drilling, drilling can be adjusted horizontally and vertically, convenient and quick to meet the requirements of drilling processing, It is the ideal equipment for various door industry processing manufacturers.

Details: Parameters
Voltage: 110V
Power: 1100W
Punching Depth: 0-40mm
Speed: 2840r/min
Drill: φ35mm*1,φ8mm*2
Combined Drill Model: 45-9.5
Scale: 19.6″(50cm)
Gross Weight: 48.4LBS（22kg）
Package Size: 15.94″*15.16″*24.41″(40.5*38.5*62cm)
Precautions For Use：
1. Before operation, check whether the power cable is properly connected, whether the protective device and the pressing device are complete, and whether the components are normal.
2. The operating position should be bright and without shadow.
3. The drill should be centered, balanced and sharp.
4. This machine is mainly used for wood punching processing (thin aluminum can also be), and the selection of materials can not have nails, screws and other tools damaged or blunt foreign bodies.
5. Hands should not touch the rotating parts of the machine tool during operation, and the wood chips should not be removed during operation. The power supply must be cut off before adjusting or removing the wood chips, and can only be carried out after the machine tool stops working.
6. Stop the machine immediately if anything abnormal is found.

EAN: 0840403718320

Part Number: DX027330