LNL TL-D3 V2 Dual BMG Extruder 3D Printer, TMC2209 32-bit Silent Mainboard, Wi-Fi Connect Remote Control, 300 Degree High Temperature, Removable Magnetic Platform,11.8''x11.8''x13.8''

Brand: LNL

Color: Black

Features:

• 💥 EACH MACHINE Has Been Fully Tested at Our U.S. Based Warehouse to eliminate the chance of damage during overseas transit. This ensures you’ll spend more time printing and less time troubleshooting. If you do have a problem, our full time regional staff will always be here to help.
• 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
• 【32-Bit Motherboard】: The main chip is upgraded from 8-bit to 32-bit, and the printer runs more smoothly The 32-bit motherboard supports wifi and can control the printer through the Internet!
• 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print with a custom height.
• 【Springsteel PEI Coated Magnetic Build-plate】 From hundreds of hours of testing, we have determined that the most versatile, effective, and cost efficient printing surface is PEI coated springsteel plating. We have created a dual sided system to allow for smooth surface finishes or rougher textured finishes to ensure maximum adhesion. This interchangeable system allows individual users to get the perfect first layer while allowing print farms to maximize production with hot-swappable plates.
• [Super cooling module]: The fans of the two nozzles can be controlled independently. The side fans of the nozzles use two blower fans to dissipate heat from the print model. The front fans of the nozzles are upgraded to 5010 silent fans to increase the cooling capacity!
• Insulated Bed (Edge to Edge) 】One of the biggest problems with the standard 3D printing industry and our previous TL-D3 Pro was the bed heating. Waiting for optimal build plate temperature can be the difference between a great print and a failed one. The D3 Vulcan has custom edge to edge insulation to maximize thermal efficiency, this addition reduces average heat times by up to 50%.
• Revamped Cable Management/Strain Relief】One of the most common issues with the TL-D3 happens during certain homing operations, the E1 or E2 cable will catch onto the rear leveling knobs and create tension on the gantry. If not corrected immediately, this can lead to damage to the cabling and even bending of the gantry lead screws. We corrected this by installing retractable cable management, relieving any strain created from cable snagging and reducing risk of accidents and malfunctions.

EAN: 0619470787108

Part Number: 01-TLD3-V2